Advertisement
🎮 Play Gimkit Now

Gimkit Device Help

Gimkit Device Compatibility: Browsers, Devices and 2D Modes

Find out which devices and browsers work with Gimkit, how to enable WebGL for 2D modes, how to run the official compatibility test, and what your school network needs to allow.

Updated 9 November 2026 · 10 min read

Advertisement

Gimkit is browser-based, so the question is usually not whether a device can run it, but whether its browser, graphics settings and school network are ready for the type of game being played. A laptop, Chromebook, tablet or phone can all join a live game, and no student app install is needed to join. The main exception is the 2D game modes, which need WebGL, a graphics technology that some older devices and locked-down school browsers have turned off. This page covers which devices and browsers work, how to check WebGL, how to use the official compatibility test, and what a school needs to unblock.

What you need to play Gimkit

To join a game, a student needs a device with a modern browser and an internet connection, plus the game code, QR code or join link for that session. Students join at gimkit.com/join: find the code on the teacher’s screen, go to the join page, enter the code, then enter a name or approve the nickname provided. Students do not need a Gimkit account to play live games. Only the host needs an account — a free Educator account — to create kits and host games.

Hosting has the same browser requirements, but the host’s device also runs the game controls, lobby and leaderboard, so a teacher’s laptop or classroom computer is usually the most comfortable choice. A student account can host, but it is limited to five players, so a full class game should be hosted from an Educator account.

Devices that work with Gimkit

Gimkit works on laptops, Chromebooks, tablets and phones. The table below summarises what to expect on each type of device.

DeviceJoining a gameWhat to check
Laptop or desktop computerWorks in a modern browserKeep the browser updated; check WebGL for 2D modes
ChromebookWorks in a modern browserOlder Chromebooks may need hardware acceleration enabled manually
TabletWorks in a modern browserUse a supported browser and a stable connection
PhoneWorks in a modern browserJoin in the browser; no student app install is needed to join

Chromebooks are a good fit for Gimkit, since they run a modern browser and are designed for web-based classroom work. Problems on Chromebooks are rarely about the device itself; they are usually about graphics settings for 2D modes, or about the school network, both covered below. If a Chromebook is several years old, start with the WebGL checks, because older Chromebooks may need hardware acceleration enabled manually.

Tablets and phones are useful when a class does not have a laptop or Chromebook for every student; a student joins in the phone or tablet browser with the same code, QR code or join link. If balances are not updating, upgrades are not activating, or power-ups cannot be bought during a game, the cause is packet loss on congested or slow Wi-Fi, and the official advice includes having students on mobile phones use cellular data.

Which browsers work with Gimkit

Gimkit works in modern browsers, including Chrome, Safari, Edge and Firefox. Use a current version of one of those browsers, on a device that can reach the Gimkit site and its game servers. If a browser has not been updated for a long time, update it before trying anything else, because an out-of-date browser is the simplest explanation for a game mode that will not load.

  • Chrome — a common choice on laptops and Chromebooks.
  • Safari — the usual browser on Apple devices.
  • Edge — a supported modern browser on Windows.
  • Firefox — a supported modern browser.

If a game loads in one supported browser but not in another on the same device, that points to a setting in the first browser — very often graphics acceleration or WebGL — rather than to a fault with the device or the network, so trying another supported browser is a quick and useful test.

No student app install is needed to join a Gimkit game. Join in a browser at gimkit.com/join, using the code, QR code or join link for the session.

Why 2D modes need WebGL

Most Gimkit games will load in any modern browser, but the 2D game modes are different: they require WebGL. WebGL is the graphics technology Gimkit uses to run its 2D modes, and Gimkit’s help centre has a dedicated article on how to enable it. If WebGL is off, or if the browser’s graphics acceleration is off, a 2D mode may fail to load even though the join page, the lobby and a non-2D mode such as Classic work normally on the same device.

The 2D modes include Fishtopia, Tag: Domination, Capture The Flag, Farmchain, Snowbrawl and Blastball, and they have a lower player limit: all 2D modes have a hard limit of 60 students, compared with 500 in a live game. So check WebGL before the lesson, rather than discovering the problem once students are in the lobby.

How to enable WebGL

In Chrome, Gimkit’s guidance is to update the browser first, then turn on graphics acceleration, and there are Safari and Firefox equivalents for those browsers. Older Chromebooks may need hardware acceleration enabled manually, so on a school Chromebook that step is worth checking even if the browser itself is up to date.

1

Update the browser. Install any available update and restart the browser.

2

Turn on graphics acceleration. In the browser settings, find the graphics or hardware acceleration setting and turn it on.

3

Restart the browser. Close the browser fully and open it again, so the changed graphics setting takes effect.

4

Test a 2D mode again. Join the game as normal. If it still does not load, run the compatibility test described next.

If the setting is greyed out, missing, or reset when the device restarts, the device may be managed by the school and the setting controlled by an administrator policy. The school IT team will then need to change the policy, so tell them that 2D modes require WebGL and share the compatibility test result.

Check your setup with gimkit.com/check

Gimkit provides an official diagnostic page at gimkit.com/check, which runs a compatibility test covering the firewall, WebSocket, SSL and WebGL checks. It is the fastest way to tell whether a problem is on the device or on the network. Run it on the device and the network where the problem happens, because a test run at home will not show a school network fault.

There is also an official server status page at gimkit.crisp.watch. Check it when Gimkit fails on every device at once. If it shows a problem on Gimkit’s side, wait and try again; if it looks normal and the compatibility test fails, the next step is the school network section below. When you report a problem, note the device and browser, whether only 2D modes are affected, whether it happens on one network or all networks, and what the compatibility test showed.

School networks: domains and ports to unblock

A device can be fully up to date and still fail to play Gimkit if the school network blocks the domains or connections Gimkit needs. Schools must allow the following domains on ports 80 and 443.

DomainWhat it is used for
*.gimkit.comThe main site, images and audio
*.gimkitconnect.comThe game servers
*.pexels.comCover photos

Ports 80 and 443 are the standard web ports, so most school networks already allow them, but the domain allowlist is often missed. If the main site loads but games do not connect, or cover photos are missing, a blocked domain is a likely cause. Some school proxies also break the secure WebSockets Gimkit games need, so a game can fail even when ordinary web pages load. Run the compatibility test on the school network itself: its WebSocket check shows whether the game connection is getting through.

If you are a teacher, pass this list to your school IT team exactly as written, with the result from gimkit.com/check. If you are a student, tell your teacher which step fails and on which network. The login help guide covers a related issue, where a Google Workspace admin must mark Gimkit as “Trusted” before school Google sign-in will work.

When a 2D mode will not load

Work through the checks in this order, so you find the cause instead of changing several things at once and never knowing which one fixed it.

  1. Check whether only 2D modes are affected. If a non-2D mode such as Classic works but a 2D mode does not, the cause is most likely WebGL or graphics acceleration.
  2. Update the browser and enable graphics acceleration. Follow the WebGL steps above, then restart the browser and try the 2D mode again.
  3. Try another supported browser. If the mode loads in a second browser, the first browser’s settings are the problem.
  4. Run the compatibility test. Open gimkit.com/check on the same device and network, and note whether the WebGL, WebSocket, firewall or SSL check fails.
  5. Check the server status page. Visit gimkit.crisp.watch to rule out a problem on Gimkit’s side.
  6. Ask the school IT team about the network. Share the test result and the domain list, and ask them to check the allowlist and whether the school proxy breaks secure WebSockets.
  7. Consider the player limit. All 2D modes have a hard limit of 60 students, so a full game is not a device problem. The teacher guide explains the hosting limits in full.

If the game loads but play goes wrong — balances not updating, upgrades not activating, or power-ups that cannot be bought — that is a different problem. Those midgame issues are caused by packet loss on congested or slow Wi-Fi, and the official advice includes having students on mobile phones use cellular data. For more on joining failures, see the joining problems guide.

Frequently asked questions

Yes, Gimkit works on Chromebooks in a modern browser. For 2D modes, check that WebGL and hardware acceleration are turned on, because older Chromebooks may need hardware acceleration enabled manually.

Yes, Gimkit is browser-based and works on tablets and phones in modern browsers, and no student app install is needed to join a game. Join at gimkit.com/join in your phone or tablet browser, using the code, QR code or join link your teacher shared.

Gimkit works in modern browsers, including Chrome, Safari, Edge and Firefox, so use the most up-to-date version of the browser installed on your device. If a game will not load in one browser, updating it or trying another supported browser is a useful next step.

2D modes require WebGL, so a 2D mode that will not load is often a WebGL or graphics acceleration problem. Update your browser first, turn on graphics acceleration, restart the browser, then run the check at gimkit.com/check.

Schools must allow *.gimkit.com, *.gimkitconnect.com and *.pexels.com on ports 80 and 443. Some school proxies break the secure WebSockets Gimkit games need, so check the school network when games fail on school Wi-Fi but work elsewhere.

First run gimkit.com/check on the school network to see which test fails, then share the result with your school IT team. The school network, rather than the device, is the likely cause when the same device works on another network.

Still stuck? See the Gimkit FAQ and the student guide.

Advertisement

Ready to join a game?

Ask your teacher for the game code for your session, then head to the official joining page.

Go to gimkit.com/join ↗Read the join guide

Gimkit Guide is an independent informational resource and is not affiliated with Gimkit.

Advertisement
Advertisement

Keep learning

Related reading from the guide library

Explore more focused answers on connected Gimkit topics.

Gimkit Join & Codes

Browse related articles and practical explanations.

View guides →

Gimkit for Students

Browse related articles and practical explanations.

View guides →

Gimkit for Teachers

Browse related articles and practical explanations.

View guides →

Gimkit Game Modes & Features

Browse related articles and practical explanations.

View guides →

Gimkit Help & Troubleshooting

Browse related articles and practical explanations.

View guides →

Browse all 50 articles →

Advertisement
↑