Gimkit Join & Codes
Browse related articles and practical explanations.
View guides →Gimkit Join Guide
Joining a Gimkit game takes less than a minute. Your teacher shares a code, a QR code, or a link, you enter it at gimkit.com/join, and you are in — no account needed. This guide walks through all four ways to join, step by step.
Joining a Gimkit game is quick, and the steps are the same in almost every classroom. The official join flow from Gimkit's help centre has five steps:
Look for the game code or QR code on your teacher's screen, or use a join link your teacher shares.
Open your browser and go to gimkit.com/join.
Type in the game code. If your teacher uses Classes and you are logged in, you join automatically.
Type your name, or approve the nickname if your teacher uses the Nickname Generator.
Wait in the lobby until your teacher starts the game.
That is the whole process. The rest of this guide explains each way to join in detail, so you can get in fast whatever your teacher shares. The steps above follow the official guide in Gimkit's help centre.
This is the most common way in. Your teacher starts a game and the code appears on the classroom screen. Open a browser on your device, go to gimkit.com/join, and type the code into the entry field exactly as it is shown. Then enter your name when asked, and you will land in the lobby.
Type carefully. A code only works for the session it was created for, so a code from a different class or an earlier lesson will not get you in. If you are unsure whether you typed it right, ask your teacher to read it out again rather than guessing. Our Gimkit game codes guide explains what a code is and why old codes stop working.
Treat the code as your class's ticket in: anyone who has it can enter it at gimkit.com/join, which is why teachers share it with the class and not publicly. If the code is rejected, the game may already have ended. See Gimkit joining problems for the full checklist of what to check.
If your teacher shows a QR code instead of a written code, the join is even faster. To show the QR code, the host hovers over the game code on their screen. Point your phone or tablet camera at the code and your browser will open the join page for that game. Enter your name when asked and you are in.
The QR method is handy when you are on a phone, because there is nothing to type. It is also useful in a busy classroom, where reading a code off a distant screen is easy to get wrong. If scanning does not work on your device, fall back to the written code: ask your teacher to read it out and type it in at gimkit.com/join instead.
Some teachers share a link rather than a code. The host gets it by clicking the game code, which copies a direct join link. The teacher might send it in a class chat, by email, or through your school's classwork system. Click the link and you land straight on the join screen for that game, then enter your name.
A join link does exactly the same job as a code — it just skips the typing. If the link opens somewhere that does not load the game, copy the link into your browser instead. Gimkit is browser-based and works in Chrome, Safari, Edge and Firefox on laptops, Chromebooks, tablets and phones.
If your teacher uses Gimkit Classes, joining can be automatic. Students join a class through a class link and sign in with Google or email. Once you are signed in, joining a live game from your class happens automatically — there is no code to type. If the teacher has Auto-Accept switched off, you will wait in the lobby until the teacher approves you.
Classes also keep student names appropriate on the leaderboard, which is one reason teachers use them. Classes are included in the free Basic plan, which covers class rostering, so a teacher does not need a paid plan to use them. If you are not signed in, or your class does not use Classes, use a code, QR code or link instead. If you need to sign in, our Gimkit login help page explains the options.
One thing to know about school Google accounts: since a Google Workspace for Education change in October 2023, a school admin must mark Gimkit as "Trusted" or school Google sign-in fails. The good news is that you can still play without logging in — the code, QR code and link methods do not need an account at all.
When you join, you will be asked for a name. Use the name your teacher expects, because that is what shows on the leaderboard and in the teacher's report after the game. If you use a joke name, your teacher may not know who you are — and the host can remove players from the lobby.
Some teachers switch on the Nickname Generator. When it is on, you cannot type a name at all: you get a random safe name, and you can spin for a new one up to three times before it locks in. That is the teacher's choice, set in the game options before the game starts, so there is nothing to fix on your side — just spin if you want a different name, then accept what you get. Our Gimkit for students guide has more on names, nicknames and playing as a student.
After you join, you wait in the lobby until your teacher starts the game. In 2D modes the host opens a new Lobby tab with the game code, and the host can join as a player or as a spectator. Once the game starts, you answer questions to earn in-game cash, which you spend on upgrades and power-ups as the game goes on.
Questions repeat as you play. Gimkit's Smart Repetition means that after you have seen each question once, questions start to repeat — and questions you missed the first time are repeated more often. It applies in live games and assignments, and it is different for each student, so the game keeps testing the material you have not learned yet.
A live game can run for up to 59 minutes, and the host can add time a minute at a time during play. Join in late is switched on by default, so classmates who arrive late can usually still get in unless the host has switched it off. At the end of the game, the teacher gets a report with class and individual data. See how Gimkit works for the full flow, from kit to report.
There is no public lobby of open games to browse. Gimkit games are private sessions run by a host, so you need the code, QR code, join link or class route from the host of the session you want. A code from someone else's game will not get you into yours, and public "free code" lists online cannot work, because codes are made for one session and expire when the game ends.
That said, you can still play Gimkit without a live game running. Practice links let students practise any kit without scoring, game mechanics, modes or reporting — useful for revision on your own. And community maps can be played through Creative Discovery, Gimkit's sandbox editor for building custom 2D maps. Neither option needs a teacher to host a game, but neither is the same as joining a live class game.
Most joining problems are device or network problems, not Gimkit problems. A quick check before the lesson starts saves a lot of waiting around.
Use a modern browser. Gimkit works in Chrome, Safari, Edge and Firefox on a laptop, Chromebook, tablet or phone, and no install is needed to join.
Check 2D modes need WebGL. If your class is playing a 2D mode and the game will not load, your device may need WebGL or hardware acceleration switched on. See our Gimkit device compatibility guide.
Check your connection. Lag, frozen balances and upgrades that do not activate are usually caused by packet loss on congested or slow Wi-Fi. On a phone, switching to cellular data can help.
If Gimkit will not load at all, try the compatibility test at gimkit.com/check and the server status page at gimkit.crisp.watch before assuming the game is the problem.
No. Students do not need a Gimkit account to play live games. You only need a student account if you use Classes, or if you want to earn XP and buy cosmetics.
At gimkit.com/join. Open the page in your browser, type the code, then enter your name when asked.
Yes. Gimkit is browser-based and works on phones, tablets, Chromebooks and laptops in Chrome, Safari, Edge or Firefox. The QR code method is handy on a phone because there is nothing to type.
Usually, yes. Join in late is switched on by default, so latecomers can normally still get in — unless the host has switched it off.
The most common reason is that the game has already ended, because codes expire when the game ends. Check the code carefully and ask your teacher to confirm the session is still open.
No. There is no public lobby of open games. You need the code, QR code, join link or class route from the host of the session you want to join.
Ask your teacher for the game code for your session, then head to the official joining page.
Gimkit Guide is an independent informational resource and is not affiliated with Gimkit.
Keep learning
Explore more focused answers on connected Gimkit topics.
Browse related articles and practical explanations.
View guides →Browse related articles and practical explanations.
View guides →Browse related articles and practical explanations.
View guides →Browse related articles and practical explanations.
View guides →Browse related articles and practical explanations.
View guides →