Advertisement
๐ŸŽฎ Play Gimkit Now

Gimkit Troubleshooting

Gimkit Not Working? Fix Join Codes, Loading & Connection Problems

If Gimkit will not let you join a game, the cause is usually simple: a code from an old session, a full lobby, a setting the host changed, or a connection problem on your device or school network. Work through the fixes below in order.

Updated 9 November 2026 ยท 10 min read

Advertisement

When Gimkit is not working, it helps to separate the problem into two questions. First, can you reach Gimkit at all? Second, can you get into this particular game? A rejected code, a frozen lobby and a "game is full" message are different problems, even though they feel the same in the moment. This guide covers each one, starting with codes, because that is where most joining problems begin.

This is an independent guide and is not affiliated with Gimkit. Real games are joined on the official site, at gimkit.com/join. If you are new to joining, read our guide to how to join a Gimkit game first.

Gimkit code not working

A code that does not work is the most common joining problem, and it has the clearest set of causes. Codes are session-specific: each new game generates a fresh code, even when the same teacher uses the same kit, and a code expires when its game ends. That fact explains most "invalid", "expired" and "not found" messages. There is also no official bonus, promo or redeem code system, so a code copied from a public list on the internet will not open a live classroom game.

Invalid, expired or not-found codes

Start by checking the code itself. Retype it slowly and compare it with the code on the teacher's screen: a single wrong character is enough for Gimkit to reject it. If you copied it from a message or a slide, check that you copied the whole thing and that no extra space crept in at the start or end. If the teacher shared a join link instead, use that link rather than typing the code, because it carries the same session information without the risk of a typing mistake.

Next, check that the code belongs to the game running right now. A code from an earlier lesson or a game that has already finished will not work, even if it worked at the time. Ask the teacher to confirm the code on their screen, and if a new game has started, ask for the new code. Our Gimkit game codes guide explains why codes cannot be reused later.

Game full

If Gimkit tells you the game is full, the game has reached a player limit and there is no way to squeeze in as an extra player. A live game can hold up to 500 students, but that is not the limit for every mode: all 2D game modes have a separate hard limit of 60 students, and Gimkit Pro Exclusive modes are limited to 5 players for Gimkit Basic members. The practical limit can also be lower, because it depends on network and device reliability.

Only the host can fix a full game, by changing to a mode with a higher limit, splitting the class, or starting a second game. If you are a student, tell the teacher the exact message you saw, so they know it is a limit and not a typing error. If you are hosting from a student account, remember that a student account can host a maximum of 5 players, so a full message at five players is expected. Hosting a whole class needs an Educator account, as explained in our guide for teachers.

Kicked from the game

Being removed is different from a code error. The host can remove players from the lobby by hovering over a name and clicking it, and can also remove players mid-game from the leaderboard. The one exception is Team Mode, where players cannot be removed mid-game. If you were removed, ask the host what happened and whether you can rejoin.

Frozen lobby

A frozen lobby is usually a loading or connection problem rather than a code problem. Wait a few seconds, then refresh the page and enter the code again at gimkit.com/join. If it still does not respond, close the tab and open a fresh browser window.

Join in late is turned off

This setting catches out many students who arrive a few minutes after the start. Join in late is on by default, so in most games you can join after play has begun. But if the host has turned it off, late arrivals are locked out, and the choice is remembered from game to game. There is no student-side workaround, so join as soon as the code appears, before the host starts play.

Gimkit not working in 2D modes: WebGL

If the main Gimkit pages load but a 2D mode will not start, or the screen stays blank, WebGL is the first thing to check. 2D modes require WebGL, and Gimkit's help centre has a dedicated article on how to enable it. The usual steps are to update the browser first, then turn on graphics acceleration; Safari and Firefox have their own equivalents. Older Chromebooks may need hardware acceleration enabled manually.

Before changing settings, run the official compatibility test at gimkit.com/check, which tests the firewall, WebSocket connection, SSL and WebGL in one place. Gimkit is browser-based and works on laptops, Chromebooks, tablets and phones in modern browsers, including Chrome, Safari, Edge and Firefox. Our device compatibility guide covers browsers and devices in more detail.

If you are on a school-managed Chromebook, you may not be able to change graphics settings yourself. Ask your school IT team to check hardware acceleration and to run the compatibility test on the same device.

Connection problems: lag, freezing and midgame issues

Some problems only appear once you are inside the game. Balances that do not update, upgrades that do not activate, and power-ups that cannot be bought are classic midgame issues. According to Gimkit's help centre, these are often caused by packet loss on congested or slow Wi-Fi, rather than by the game code or your account.

Move closer to the Wi-Fi router if you can, and close other tabs, videos and downloads using the same connection. If you are playing on a mobile phone, Gimkit's official advice includes using cellular data instead of Wi-Fi. Do not keep refreshing during a game unless the screen has fully frozen, because rejoining mid-game depends on the late-joining setting.

School networks and firewalls: domains to unblock

School networks are a common cause of Gimkit not working, especially when Gimkit works at home but not in the classroom. Some school proxies break the secure WebSockets that Gimkit games need, so the game may load partly and then fail to connect. This is a network problem, not a problem with the code or the device, and it needs the school IT team to fix it.

Schools must allow these domains, on ports 80 and 443:

  • *.gimkit.com โ€” the main site, images and audio.
  • *.gimkitconnect.com โ€” the game servers.
  • *.pexels.com โ€” cover photos.

Ask your IT team to check the list of domains to unblock in Gimkit's help centre, and to run the compatibility test on a school device.

Check whether Gimkit itself is down

Before you spend a long time changing settings, check whether the problem is on Gimkit's side. Use the official diagnostic tools: the compatibility test at gimkit.com/check and the server status page at gimkit.crisp.watch. If the status page shows a problem, or if the whole class is affected at the same time, the best step is to wait and try again later.

1

Run the compatibility test. Open gimkit.com/check on the device that is failing and note which checks pass and which fail.

2

Check the status page. Open gimkit.crisp.watch to see whether Gimkit's servers are having problems.

Quick troubleshooting table

What you seeLikely causeFirst thing to try
Code says invalid or not foundTyping mistake, or a code from an earlier gameRetype the code carefully, or use the join link, at gimkit.com/join.
Code worked before, now it does notThe game has ended and the code has expiredAsk the host for the fresh code for the new game.
Game is fullA player limit has been reachedAsk the host to change the mode or start another game.
You were removed from the gameThe host removed you from the lobby or leaderboardAsk the host whether you can rejoin.
You cannot join after the startJoin in late is turned offJoin before the game starts, or ask the host to start a new game.
Lobby freezesLoading or connection problemRefresh once, then try a fresh browser window.
2D mode will not loadWebGL is off or unavailableUpdate the browser, enable graphics acceleration, and run gimkit.com/check.
Lag, balances or upgrades not updatingPacket loss on congested Wi-FiMove closer to the router, or try cellular data on a phone.
Gimkit works at home, not at schoolSchool firewall or proxy blocking the game serversAsk IT to allow *.gimkit.com, *.gimkitconnect.com and *.pexels.com on ports 80 and 443.

When to contact Gimkit support

If you have worked through this page, tried a different device and a different network, and Gimkit still will not work, contact Gimkit support at hello@gimkit.com. Include the device and browser you used, the exact message you saw, and what gimkit.com/check reported.

Do not trust public lists of game codes, and do not pay anyone for a code. Codes are session-specific and expire when the game ends, and there is no official bonus or promo code system, so a code from a list cannot open a live classroom game.

If your problem is with signing in rather than joining, see our Gimkit login help page. If you need a quick answer to a common question, our Gimkit FAQ hub links to the detailed guide for each topic.

Frequently asked questions

The most common causes are a typing mistake, a code from an earlier game, or a game that has already ended. Codes are session-specific and expire when the game ends, so ask your teacher for the code for the current game and enter it again carefully at gimkit.com/join.

The game has reached a player limit. A live game can hold up to 500 students, but 2D game modes have a separate hard limit of 60 students, and some modes are limited to 5 players for Gimkit Basic members. Only the host can fix this, by changing the mode or starting another game.

The host can remove players from the lobby and during a game, so you may have been removed by your teacher. Ask the host what happened and whether you can rejoin; if joining late has been turned off, you may need to wait for a new game.

If other pages load but a 2D Gimkit mode does not, WebGL is the usual cause, because 2D modes require it. Update your browser first, then turn on graphics acceleration, and run the compatibility test at gimkit.com/check. Older Chromebooks may need hardware acceleration enabled manually.

Midgame problems such as balances not updating, upgrades not activating, or power-ups that cannot be bought are often caused by packet loss on congested or slow Wi-Fi. Move closer to the router, use a less busy connection, or, if you are on a mobile phone, try cellular data.

No. Each new game generates a fresh code, even when the same teacher uses the same kit, and a code expires when its game ends. Public lists of codes cannot work for the same reason, so always use the code your teacher shares for the game you are joining now.

Advertisement

Ready to join a game?

Ask your teacher for the game code for your session, then head to the official joining page.

Go to gimkit.com/join โ†—Read the join guide

Gimkit Guide is an independent informational resource and is not affiliated with Gimkit.

Advertisement
Advertisement

Keep learning

Related reading from the guide library

Explore more focused answers on connected Gimkit topics.

Gimkit Game Modes & Features

Browse related articles and practical explanations.

View guides โ†’

Gimkit Help & Troubleshooting

Browse related articles and practical explanations.

View guides โ†’

Browse all 50 articles โ†’

Advertisement
โ†‘